HP Synergy 680 Gen9 CTO Compute Module – With warranty and technical service for installation or support.
A DC Parts is a distributor of new and refurbished HPE equipment and accessories. Our technology experts can help you select and configure the right HPE blade solution for your specific data needs. Like all of our equipment, HPE blades are fully tested, so you can count on worry-free service for years to come. And should the need arise, our team of certified engineers is on hand to provide support for any issues you may have. If you would like to speak with a representative about HPE equipment offerings, please contactcontact us.
– SPARE PARTS AVAILABLE FOR EACH MODEL. CONSULT THE PRICE OF spare drives, controllers, power supplies, network cards, HBAs, SFPs, cables, etc.
Product Description HPE Synergy 680 Gen9
The HPE Synergy 680 Gen9 Compute Module is part of a composite infrastructure (CI) solution that is easily discovered and provisioned in minutes and can be repurposed with the same simplicity. The HPE Synergy 680 Gen9 Compute Module delivers mission-critical availability and performance, as well as flexible memory, storage, and fabric options in a full-height double-wide, 4-socket form factor.
Designed to support demanding, data-intensive enterprise workloads, this module is powered by Intel Xeon processors, supports up to 12TB of DDR4 memory, HPE DDR4 memory, has flexible storage controller options, ten I/O connectors, and is part a pool of flexible computing capacity within a composite infrastructure.
run anything
The HPE Synergy 680 Gen9 Computing Module supports up to 12TB of DDR4 memory and Intel Xeon processors in a full-height double-wide 4S form factor for demanding workloads such as business processing, decision support, IT infrastructure and other workloads. mission-critical work with large memory demands.
The flexible design supports driveless stateless configuration, up to four SFF or eight uFF drives, NVMe workload acceleration, and direct-attach composite storage to meet demanding workload, data protection, and data security requirements.
Ten mezzanine connectors with simplified I/O architecture for expandability and a wide variety of storage and fabric options.
move faster
The HPE Synergy 680 Gen9 Computing Module provides a composite compute resource that can be self-discovered, quickly provisioned, easily managed, and seamlessly redeployed to deliver the right compute capacity for changing workload needs.
HPE Synergy template-based provisioning enables fast time-to-service with a single point to define compute module state, pooled storage, network connectivity, and boot image.
Características do produto
|
Feature
|
Overview
|
|||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
cache memory
|
See the processor list above for cores, model number and cache memory size
|
|||||||||||||||||||||
|
chipset
|
Intel C602J series chipset
|
|||||||||||||||||||||
|
In the system management chipset
|
HPE iLO (HPE iLO4 2.0 Firmware), 4GB NAND with 1GB USB user space configurable VIA UEFI and accessiblevia iLO. Read and learn more
|
|||||||||||||||||||||
|
memory protection
|
|
|||||||||||||||||||||
|
Memory
|
|
|||||||||||||||||||||
|
Network controller
|
Default iLO network controller:
|
|||||||||||||||||||||
|
Mezzanine Connectors
|
Ten (10) mezzanine I/O expansion connectors (in PCIe discovery order):
Mezzanine options include:
|
|||||||||||||||||||||
|
storage controller
|
|
|||||||||||||||||||||
|
Maximum internal storage
|
|
|||||||||||||||||||||
|
Interfaces
|
|
|||||||||||||||||||||
|
Industry standard compliance
|
|
|||||||||||||||||||||
|
Frames
|
The HPE Synergy 12000 board is the foundation for all Synergy products and supports:
|
|||||||||||||||||||||
|
Recorders
|
Integrated matrox G200eh video controller
HPE iLO management in system management memory
|
|||||||||||||||||||||
|
Form factor
|
The HPE Synergy 680 Gen9 is a full-height, double-width computing module that connects to the HPE Synergy 12000 frame
|
|||||||||||||||||||||
|
Security
|
|
|||||||||||||||||||||
|
Support for fiber channels
|
Up to four (4) optional Fiber Channel mezzanine HBAs are supported on the HPE Synergy 680 Gen9
|
|||||||||||||||||||||
|
compatible SAN
|
HPE Synergy 680 Gen9 Computing Modules are optimized for HPE MSA, EVA, 3PAR, XP and LeftHand
|
Software overview
|
Feature
|
Overview
|
|---|---|
|
Support for operating systems and virtualization software for computational modules
|
|
Physical Specifications
|
Specification
|
Overview
|
|---|---|
|
Height (H x W x D) with frame
|
127 x 430,3 x 600 mm (5,06 x 16,94 x 23,62 in.)
|
|
Weight :
|
|
|
Power Specifications
|
For power specifications, including input requirements, BTU rating, and power supply output, see HPE Synergy Board TechSpecs.
|
|
HPE smart arrayP542D controller
|
storage interface
SAS Connectors
SAS speed
PCIe link rate
Memory bus speed
Supported logical commands
Max drives supported
RAID support
Upgradeable firmware
|
|
HPE smart arrayP240nr / 1GB controller
|
Disk drive interface
server interface
cache memory
Supported logical commands
Host memory address
RAID support
Other
|
|
HPE smart HBAH240nr smartHBA
|
Disk drive interface
computing module interface
cache memory
Supported logical commands
Host memory address
RAID support
Other
|
|
HPE Synergy2820C 10Gbconvergednetwork Adapter
|
Model
network processor
Data transfer method
network transfer rate
IEEE Compliance
Standard Features
|
|
HPESynergy 3820C10 / 20Gbconvergednetwork adapter
|
Model
network processor
Data transfer method
network transfer rate
IEEE Compliance
Standard Features
|
Environmental Specifications
|
Specification
|
Overview
|
|---|---|
|
Operating Temperature
|
10° to 35°C (50° to 95°F)
|
|
Out of operation temperature
|
-30° to 60°C (-22° to 140°F)
|
|
Extended operational support for environments
|
For approved hardware configurations, the supported system input range is extended to be: 5° to 10°C (41° to 50°F) and 35° to 40°C (95° to 104°F) at the sea with an analtitude reduction of 1,0°C for every 175 m (1,8°F for every 574 ft) above 900 m (2953 ft) to a maximum of 3.050 m (10.000 ft).
Approved hardware configurations for this system are listed at the URL:
|
|
Operating relative humidity
|
8% a 90%
|
|
Non-operating relative humidity
|
5% a 95%
|
|
operational altitude
|
3050 m (10.000 ft)
|
|
Operation out of altitude
|
9144 m (30.000 ft)
|
|
acoustic noise
|
For acoustic noise specifications, see the HPE Synergy 12000TechSpecs chart located at:
|
Some segments of the economy that we help
Some segments of the economy that we help
Third party maintenance for HPE End-of-Life (EOL) and HPE End-of-Service-Life (EOSL)
A DC Parts made an analysis on more than 250 customer contracts that use storage, servers, networks and tapes and showed us that 40-60% of the equipment of these customers operate beyond the end dates of support.
There are simple options for you to reduce your expenses and feel more confident about your IT infrastructure. When you choose a custom solution to extend the life of your IT equipment, you can make big savings.
How can we help:
We offer our customers a unique assessment to help analyze their OEM support contracts and understand exactly which devices can be supported in the most affordable way, without compromising their performance.
HPE Blade Leases
A DC Parts provides HPE server rentals for a convenient and affordable solution to a range of data center issues such as seasonal spikes and data center relocation. We work to match the right approach with the right equipment to properly meet your customized need for HPE Storage and Blade leases. With a highly trained team of certified engineers ready to solve any problems, DC Parts is uniquely qualified to serve you. If you would like to speak with a representative about leasing HPE machines, please contact us.
HPE Blade Support
Support services DC Parts support HPE appliances. We work to match the right approach with the right equipment to meet your HPE equipment support needs. With a highly trained team of certified engineers ready to resolve any issues with HPE equipment, DC Parts is uniquely qualified to serve you. If you would like to speak with a representative about purchasing HPE Equipment Support, please contact us. THE DC Parts helps companies of all sizes better manage their IT data centers by providing third-party support services to leading equipment manufacturers, including: IBM, HPE, DELL EMC, NETAPP and much more. With support DC Parts, we manage all your hardware, between the manufacturers through a link. Support from DC Parts offers flexible service level agreements, certified engineering support teams and dedicated customer service representatives. Extend the life and value of your IT assets. contact support DC Parts immediately.
We customize maintenance contracts according to your specific needs, covering different brands and equipment throughout Brazil. Our services include parts exchanges, updates and software troubleshooting, providing complete support for your demands. To find out more visit – DC Parts serving more than 120 cities in Brazil
