Name: HP ProLiant BL660c Gen8 CTO Blade Server
SKU: bl660c-gen8
Price: 843.23 USD
Availability: InStock

Description

HP ProLiant BL660c Gen8 Blade Server – With warranty and technical service for installation or support.

A DC Parts is a distributor of new and refurbished HPE equipment and accessories. Our technology experts can help you select and configure the right HPE blade solution for your specific data needs. Like all of our equipment, HPE blades are fully tested, you can count on worry-free service for years to come. And, should the need arise, our team of certified engineers is on hand to provide support for any issues you may have. If you would like to speak with a representative about HPE equipment offerings, please contact contact us.

Product description HP ProLiant BL660c Gen8 CTO Blade Server

The HPE ProLiant BL660c Gen8 Server Series is ideal for virtualization, database, business processing and general data intensive 4P applications where fine-tuning of data center space and price/performance is critical. Supporting high-density, cost-effective Intel Xeon E5-4600 processors, the BL660c Gen8 Server series redefines 4-socket blade technology with density optimized without compromising performance, scalability, and expandability.

The HP ProLiant BL660c Gen8 Server Blade redefines 4S blade technology with optimized density. This scalable server blade delivers the ideal four-socket dense form factor without compromising 4P performance, scalability and expandability. The HP ProLiant BL660c Gen8 Server Blade is ideal for virtualization, database, business processing and general data-intensive 4P applications where data center space and price/performance are paramount.

What's New in the HP ProLiant BL660c Gen8

Support for Intel Xeon Processor E5-4600v2 Product Family
Support for DDR3-1600 1,35V memory
Support for DDR3-1866 1,5V memory
Support for 12G SAS High Endurance Hot Plug SFF (2,5 inches) Enterprise Performance and Enterprise Mainstream Solid State Drives

BL660c Gen8 panel view

Powerful performance

Built on the Gen8 capabilities of the ProActive Insight architecture, the HPE BL660c Gen8 delivers improvements in performance, memory, networking, I/O, storage and management.

It supports up to four E5-4600 processors, up to four 10Gb FlexFabric ports with the Gen8 FlexibleLOM solution, and 1,0TB of Gen8 HP SmartMemory (SmartMemory uses less power but no performance impact) and comes with three PCIe expansion slots 3.0 (two x 16, one x 8).

The integrated Gen220 Smart Array P8i RAID controller supports HP Smart Storage and SmartDrive carrier, plus a wide selection of hot plug SAS, SATA, SAS SSD, and SATA SSD hard drives.

With all of this infrastructure in one box, you can handle virtualization, database, business processing, decision support, and HPC applications that demand more data.

Optimal 4P form factor

The HPE ProLiant BL660c Gen8 Blade Server is a new density-optimized blade server that delivers 4P performance in a single-width, full-height form factor.

You get twice the compute density compared to the previous Intel-based 4P Server Blade without compromising on performance, scalability, and expandability.

BL660c Gen8 chassis view

Características do produto

Feature	Description
Processor (one of the following depending on the model)	E5-4600 v2 series processors HPE BL660c Gen8 E5-4657Lv2 Processor (2,4GHz / 12 Cores / 30MB / 115W) HPE BL660c Gen8 E5-4650v2 Processor (2,4GHz / 10 Cores / 25MB / 95W) HPE BL660c Gen8 E5-4640v2 Processor (2,2GHz / 10 Cores / 20MB / 95W) HPE BL660c Gen8 E5-4627v2 Processor (3,3GHz / 8 Cores / 16MB / 130W) HPE BL660c Gen8 E5-4620v2 Processor (2,6GHz / 8 Cores / 20MB / 95W) HPE BL660c Gen8 E5-4610v2 Processor (2,3GHz / 8 Cores / 16MB / 95W) HPE BL660c Gen8 E5-4607v2 Processor (2,6GHz / 6 Cores / 15MB / 95W) HPE BL660c Gen8 E5-4603v2 Processor (2,2GHz / 4 Cores / 10MB / 95W) E5-4600 Series Processors Intel Xeon Processor E5-4650 (2,7GHz / 8 Cores / 20MB / 130W) Intel Xeon Processor E5-4650L (2,6GHz / 8 cores / 20MB / 115W) Intel Xeon Processor E5-4640 (2,4GHz / 8 Cores / 20MB / 95W) Intel Xeon Processor E5-4620 (2,2GHz / 8 Cores / 16MB / 95W) Intel Xeon Processor E5-4617 (2,9GHz / 6 Cores / 15MB / 130W) Intel Xeon Processor E5-4610 (2,4GHz / 6 Cores / 15MB / 95W) Intel Xeon Processor E5-4607 (2,2GHz / 6 Cores / 12MB / 95W) Intel Xeon Processor E5-4603 (2,0GHz / 4 Cores / 10MB / 95W)
cache memory (one of the following, depending on the model)	30 MB Level 3 For E5-4657L v2 processor 25 MB Level 3 For E5-4650 v2 processor 20 MB Level 3 For E5-4650, E5-4650L, E5-4640, E5-4640 v2, E5-4620 v2 processors 16 MB Level 3 For E5-4650, E5-4650L, E5-4640, E5-4640 v2, E5-4620 v2 processors 15 MB Level 3 For E5-4617, E5-4610, E5-4607 v2 processors 12MB Level 3 For E5-4607 Processor 10 MB Level 3 For E5-4603, E5-4603 v2 processors
chipset ¹	Intel C600 Series Chipset
Upgradeability	Upgradeable to four (4) processors
No System Management Chipset	HPE iLO (Firmware: HP iLO 4) ²
memory protection	ECC data bus protection Advanced ECC / SDDC Classification fight (online spare) time signature DIMM address / control bus parity protection DIMM isolation failed Demand cleaning patrol cleaning Thermal memory control
Memory (one of the following, depending on the model) ³	Model HP SmartMemory Reduced (LRDIMM) and registered (RDIMM) DDR3 load Standard (pre-configured templates) 128GB (8 x 16GB) DDR3 1600MHz RDIMMs at 1,5V 128GB (8 x 16GB) DDR3 1333MHz RDIMMs at 1,35V Maximum (LRDIMM) 1,0 TB (32 x 32 GB) up to 1866 MHz at 1,5 V Maximum (RDIMM) 512 GB (32 x 16 GB) up to 1600 MHz at 1,35 V 768 GB (32 x 24 GB) up to 1333 MHz at 1,35 V
Network controller ⁴	Two (2) HP FlexibleLOM connectors for one or two FlexibleLOM ports
Expansion slots	Three (3) I/O expansion mezzanine slots: x8 PCIe 3.0 Type A (supports Type A mezzanine cards) (expansion slot 1)) x16 PCIe 3.0 Type B (supports Type A and Type B mezzanine cards (expansion slot 2)) x16 PCIe 3.0 Type B (supports Type A and Type B mezzanine cards (expansion slot 3)) Mezzanine card options include: Dual Port to Quad Port (depending on model) 10Gb FlexFabric, 10Gb Flex-10, 10Gb Ethernet and 1Gb Ethernet for additional Ethernet network ports Dual Port 8Gb Fiber Channel HBA for SAN Connectivity QDR and FDR InfiniBand for low-latency, high-bandwidth server interconnectivity HP Smart Array P721m Controller for Direct Attach SAS Storage HP I/O Accelerator options for increased I/O performance and low-latency storage access with solid-state reliability
storage controller (all models)	One (1) HP Smart Array P220i controller ⁵ integrated Available Options – Smart Array Advanced Pack 2.0 Software for better performance, reliability, availability and security of system data
Maximum internal storage ⁶	Hot Plug SFF SAS - 2,4 TB (2 x 1,2 TB) Hot Plug SFF SATA – 2,0 TB (2 x 1,0 TB) Hot Plug SFF SAS SSD – 1,6 TB (2 x 800 GB)
Interfaces ⁷	Micro SDHC Slot - One (1) internal Micro Secure Digital High Capacity (Micro SDHC) card slot USB 2.0 port - One (1) internal USB 2.0 connector for USB flash media drive keys
Graphics	Integrated Matrox G200 video standard 1280 x 1024 (32 b / p) 1920 x 1200 (16 b / p) HP iLO 4 in system management memory 16 MB Flash 256MB DDR 3 with ECC (112MB after ECC and video)
Form factor	The HP ProLiant BL660c Gen8 is a single-width, full-height blade server that connects to the HP BladeSystem c3000 and c7000 enclosures
Industry standard compliance	ACPI 2.0 Microsoft logo certifications USB 2.0 support IMPI 2.0 Secure Digital 2.0 TMP 1.2 Support IEEE (specific IEEE standards depending on the installed Ethernet adapter(s) card(s)) Advanced Encryption Standard (AES) Triple Data Encryption Standard (3DES) SNMP SSL 2.0 DMTF Systems Management Architecture for Server Hardware Command Line Protocol (SMASH CLP) Active Directory v1.0 PCIe 3.0 SR-IOV capability (requires network adapter and OS support)
NOTE: 1 . Click here for more information on Intel chipsets 2 . Click here for more information about iLO . 3 . HP memory from previous generation servers is not qualified or warranted with this server. HP SmartMemory is required to realize the memory performance improvements and enhanced functionality listed in this document for Gen8. Click here for additional information about HP SmartMemory . LRDIMMs and RDIMMs are distinct memory technologies and cannot be mixed in one server. Depending on memory configuration and processor model, memory speed can run at 1600 MHz, 1333 MHz, or 1066 MHz. 4. FlexibleLOM options include 10Gb FlexFabric, 10Gb Flex-10, and 10Gb Ethernet. FlexFabric features require the use of an HP Virtual Connect FlexFabric module. The server supports one or two FlexibleLOMs, which must be identical. For pre-configured template configurations, two FlexibleLOMs are already included; no additional FLexibeLOM is added. For a Factory Integrated Template configuration with a FlexibleLOM, it is added in the HP Networking section of “Step 2” in the Factory Integrated Templates section. For a factory-integrated model configuration with two FlexibleLOMs, the second FlexibleLOM (albeit the same technology) is a different part number. The user must select the first FlexibleLOM in the HP Network “Step 2” section and select the second FlexibleLOM in the HP Network “Step 4” section. 5 . The HP Smart Array P220i includes 512MB of flash-based write cache (FBWC) with support for RAID 0 and 1 on pre-configured models and is optional on factory-integrated models. The HPE Smart Array P220i supports upgradeable firmware with recovery ROM. The HP Smart Array P220i supports two (2) small form factor (SFF) hot plug drive bays. 6 . The ProLiant BL660c Gen8 server includes the new HP SmartDrive carrier hot plug small form factor (SFF) for improved manageability and reduced maintenance errors. Previous generation HP server drives are not compatible with ProLiant BL660c Gen8 drive bays. Combining standard SAS drives with SSD SAS drives is supported by the server, but limits the RAID configuration to two separate RAID 0 volumes. Mixing other types of units is not supported. 7 . The above options are for integrated hypervisor virtualization environments that need a low-cost boot solution with the highest performance and reliability.

Software overview

Feature	Description
Operating system support and virtualization software for ProLiant servers ¹	Microsoft Windows Server Red Hat Enterprise Linux (RHEL) SUSE Linux Enterprise Server (SLES) Oracle Solaris VMware Citrix XenServer
HP Insight Management Software	HPE Service Pack for ProLiant (SPP) HPE Insight Control HPE iLO Advanced License for ProLiant BladeSystem Servers HPE Matrix Operating Environment
High Performance Clusters	HPE Cluster Platforms HPE HPC Interconnects HPE Insight Cluster Management Utility HPE HPC Linux Value Pack
NOTE: 1 . For more information on HPE Certified and Supported ProLiant Servers for OS and Virtualization Software and the latest list of available server software drivers, visit the Support Matrix and Driver Download page. Click here to access the support matrix . Click here to access the driver download page .

Physical Specifications

Specifications	Description
Dimensions (H x W x D) (with frame)	366,27 x 56,54 x 516,67 mm (14,42 x 2,23 x 20,34 in.)
Weight (approximate)	Maximum (4 processors, 2 FlexibleLOMs, 32 DIMMs, 2 hard drives, 3 mezzanine cards and 2 flash cache batteries installed) 12,3 kg (27,1 lb) Minimum (2 processors, 1 FlexibleLOM and 2 DIMMs installed) 9,2 kg (20,2 lb)

Electrical Specifications

Specifications	Description
HP BladeSystem c3000 Enclosure
Entry requirements (by AC power supply)	Nominal line voltage 90 - 132 V ac 180 - 264 V ac Rated input current 9,3 A (at 100 V ac) 9,7 A (at 120 V ac) 7,8 A (at 200 V ac) 7,2 A (at 208 V ac) 6,8 A (at 220 V ac) 6,2 A (at 240 V ac) Nominal input frequency 47 to 63 Hz
BTU rating	Maximum per power supply 2728 BTU / hr (at 100 V ac) 3069 BTU / hr (at 120 V ac) 4092 BTU / hr (at 200 to 240 V ac)
Power supply output (by power supply)	Nominal power at steady state 800 W (at 100 V ac) 900 W (at 120 V ac) 1200 W (from 200 to 240 V ac) peak power 880 W (at 100 V ac) 990 W (at 120 V ac) 1350 W (from 200 to 240 V ac)
HP BladeSystem c7000 Enclosure
Entry requirements (single phase model)	Nominal input frequency 50 to 60 Hz Rated input voltage (2400 W PSU) 200 to 240V ac Rated input current per power supply (2400 W PSU) 13,9 A at 200 V ac 13,3 A at 208 V ac 12,6 A at 220 V ac Rated input power per power supply 2780 VA
Entry requirements (NA / JPN three-phase model)	Rated input voltage 200 to 208 V AC Line for Delta Three-Phase Line Nominal input frequency 50 to 60 Hz Maximum input current per line cable (2250 W PSU) 22,6 A at 200 V ac 21,8 A at 208 V ac Maximum input power per line cable 7836 VA max. Maximum input current per line cable (2400 W PSU) 24 A at 200 V ac 23,1 A at 208 V ac Maximum input power per line cable 8340 VA max.
Entry requirements (three-phase international model)	Rated input voltage 346 V ac to 415 V ac line to line 200 V ac to 240 V ac Line to neutral 3-Phase WYE Nominal input frequency 50 to 60 Hz Maximum input current per line cable (2250 W PSU) 11,9 A at 220 V ac 10,9 A at 240 V ac Maximum input power per line cable 7836 VA max. Maximum input current per line cable (2400 W PSU) 12,6 A at 220 V ac 11,5 A at 240 V ac Maximum input power per line cable 8340 VA max.
DC power input requirements	Rated input voltage 36 to -72 V dc Maximum input current per line cable A 75 Maximum input power per line cable 2700 W
Output Specifications (by power supply)	HP 2400W High Efficiency Hot-Plug Power Supply 200 – 240 V ac 2400 W 92% efficiency HP 2250 W hot-plug power supply -48 V dc 2250 W

Environmental Specifications

Specifications	Description
System inlet temperature	operating ¹ : 10° to 35°C (50° to 95°F) Not operational ² : -30° to 60° C (-22° to 140° F)
Relative humidity (no condensation)	Operating: 10% to 90% relative humidity (Rh), maximum wet bulb temperature 28°C (82,4°F), non-condensing. Out of operation: 5% to 95% relative humidity (Rh), maximum wet bulb temperature of 38,7°C (101,7°F), non-condensing.
Altitude	In operation: 3.050 m (10.000 ft). This value can be limited by the type and number of options installed. The maximum allowable altitude change rate is 457 m/min (1.500 ft/min). Out of operation: 9.144 m (30.000 ft). The maximum allowable altitude change rate is 457 m/min (1.500 ft/min).
NOTE: 1 . Measurement at sea level with an altitude reduction of 1,0°C for every 305 m (1,8°F for every 1.000 ft) above sea level to a maximum of 3.050 m (10.000 ft) without sunlight sustained direct. The maximum rate of change is 10°C/h (18°F/h). The upper limit can be limited by the type and number of options installed. System performance may degrade if operating at fan failure or above 30°C (86°F). 2 . The maximum rate of change is 20°C/h (36°F/h).

Some segments we help

Third party maintenance for HPE End-of-Life (EOL) and HPE End-of-Service-Life (EOSL)

A DC Parts made an analysis on more than 250 customer contracts that use storage, servers, networks and tapes and showed us that 40-60% of the equipment of these customers operate beyond the end dates of support.

There are simple options for you to reduce your expenses and feel more confident about your IT infrastructure. When you choose a custom solution to extend the life of your IT equipment, you can make big savings.

How can we help:

We offer our customers a unique assessment to help analyze their OEM support contracts and understand exactly which devices can be supported in the most affordable way, without compromising their performance.

HPE Blade Leases

DC Parts provides HPE server rentals for a convenient and affordable solution to a range of data center issues such as seasonal spikes and data center relocation. We work to match the right approach with the right equipment to suit your customized need for HPE Storage and Blade rentals. With a highly trained team of certified engineers ready to resolve any issues, DC Parts is uniquely qualified to serve you. If you would like to speak to a representative about HPE machine rentals enter in contact us.

HPE Blade Support

Support services DC Parts provide support for HPE equipment. We work to match the right approach with the right equipment to meet your HPE equipment support needs. With a highly trained team of certified engineers ready to troubleshoot any HPE equipment issues, DC Parts is uniquely qualified to serve you. If you would like to speak with a representative about purchasing HPE Equipment Support, contact us. The DC Parts helps companies of all sizes better manage their IT data centers by providing third-party support services to leading equipment manufacturers, including: IBM, HPE, Dell EMC, Oracle Sun, Cisco and much more. With support DC Parts, we manage all your hardware, between the manufacturers through a link. Support from DC Parts offers flexible service level agreements, certified engineering support teams and dedicated customer service representatives. Extend the life and value of your IT assets. Contact DC Parts support immediately.