HPE Synergy 680 Gen9 CTO Compute Module

HPE Synergy 680 Gen9 CTO Compute Module – With warranty and technical service for installation or support.

A DC Parts is a distributor of new and refurbished HPE equipment and accessories. Our technology experts can help you select and configure the right HPE blade solution for your specific data needs. Like all of our equipment, HPE blades are fully tested, so you can count on worry-free service for years to come. And should the need arise, our team of certified engineers is on hand to provide support for any issues you may have. If you would like to speak with a representative about HPE equipment offerings, please contactcontact us.

– SPARE PARTS AVAILABLE FOR EACH MODEL. CONSULT THE PRICE OF spare drives, controllers, power supplies, network cards, HBAs, SFPs, cables, etc.

Product Description HPE Synergy 680 Gen9
The HPE Synergy 680 Gen9 Compute Module is part of a composite infrastructure (CI) solution that is easily discovered and provisioned in minutes and can be repurposed with the same simplicity. The HPE Synergy 680 Gen9 Compute Module delivers mission-critical availability and performance, as well as flexible memory, storage, and fabric options in a full-height double-wide, 4-socket form factor.

Designed to support demanding, data-intensive enterprise workloads, this module is powered by Intel Xeon processors, supports up to 12TB of DDR4 memory, HPE DDR4 memory, has flexible storage controller options, ten I/O connectors, and is part a pool of flexible computing capacity within a composite infrastructure.

run anything
The HPE Synergy 680 Gen9 Computing Module supports up to 12TB of DDR4 memory and Intel Xeon processors in a full-height double-wide 4S form factor for demanding workloads such as business processing, decision support, IT infrastructure and other workloads. mission-critical work with large memory demands.
The flexible design supports driveless stateless configuration, up to four SFF or eight uFF drives, NVMe workload acceleration, and direct-attach composite storage to meet demanding workload, data protection, and data security requirements.
Ten mezzanine connectors with simplified I/O architecture for expandability and a wide variety of storage and fabric options.

move faster
The HPE Synergy 680 Gen9 Computing Module provides a composite compute resource that can be self-discovered, quickly provisioned, easily managed, and seamlessly redeployed to deliver the right compute capacity for changing workload needs.
HPE Synergy template-based provisioning enables fast time-to-service with a single point to define compute module state, pooled storage, network connectivity, and boot image.

Características do produto

Feature
Overview
cache memory
See the processor list above for cores, model number and cache memory size
chipset
Intel C602J series chipset
In the system management chipset
HPE iLO (HPE iLO4 2.0 Firmware), 4GB NAND with 1GB USB user space configurable VIA UEFI and accessiblevia iLO. Read and learn more
memory protection
  • Advanced ECC
  • memory mirroring
  • Online Memory Spare Mode (Classification Spare Mode)
Memory
Model
HPE SmartMemory or DDR4 load reduced (LRDIMM) or registered (RDIMM)
Available DIMM slots
98 (24 DIMM slots per processor, 8 channels per processor, 3 DIMMs per channel)
Maximum (LRDIMM)
6 TB (96 x 64 GB)
Maximum (RDIMM)
3 TB (96 x 32 GB)
Network controller
  • HPE Synergy 6810C 25/50Gb Ethernet Adapter
  • HPE Synergy 3830C 16Gb Fiber Channel Host Bus Adapter
  • HPE Synergy 3530C 16Gb Fiber Channel Host Bus Adapter
  • HPE Synergy 3820C 10/20 Gb Converged Network Adapter
  • HPE Synergy 2820C 10Gb Converged Network Adapter
Default iLO network controller:
  • One (1) 1 Gb / s port for the HPE iLO 4 link to HPE Synergy composer
Mezzanine Connectors
Ten (10) mezzanine I/O expansion connectors (in PCIe discovery order):
  • Mezzanine connectors 4 and 10 are X8 PCIe 3.0 and support type C and D mezzanine boards for fabric1
  • Mezzanine connectors 6 and 12 are X16 PCIe 3.0 and support C-type mezzanine board for fabric 3
  • Mezzanine connectors 3 and 9 are X8 PCIe 3.0 and support C-type mezzanine cards for fabric 3
  • Mezzanine connectors 1 and 7 are X8 PCIe 3.0 and support C-type and D-type mezzanine cards for fabric 1
  • Mezzanine connectors 2 and 8 are X16 PCIe 3.0 and support C-type and D-type mezzanine cards for fabric 2
Mezzanine options include:
  • 10/20Gb Dual Port Computing Module Mezzanine Adapter Options for Additional Network Ports
  • Dual Port 16Gb Fiber Channel HBA for SAN Connectivity
storage controller
  • HPE Smart Array P240nr Controller with 1GB Flash Supported Write Cache (FBWC) with support for RAID 0, 1,10, 5, 6, and 1 ADM
  • HPE smart array P542D controller with 2GB FBWC with support for RAID 0, 1,10, 5, 50, 6, 60, 1 ADM and 10 ADM
  • HPE H240nr Smart HBA compatible with RAID 0, 1, 10, 5
Maximum internal storage
Courts Models
Capacity
Configuration
SFF SAS hot plug
8,0 TB
4 x 2,0 TB
SFF SATA hot plug
8,0 TB
4 x 2,0 TB
Hot Plug SFF SAS SSD
15,28 TB
4 x 3,84 TB
SFF SATASSD hot plug
6,4 TB
4 x 1,6 TB
SFF NVMeSSD hot plug
8,0 TB
4 x 2,0 TB
Hot Plug UFF SATA SSD
2,72 TB
GB x 8 340
Interfaces
Micro SDHC slot
One (1) built-in high capacity digital secure micro card slot (Micro SDHC)
2.0 USB port
One (1) internal USB 2.0 connector for USB flash media drive keys
2.0 USB port
One (1) external USB 2.0 connector for USB flash media drive keys
Industry standard compliance
  • ACPI 2.0
  • Microsoft logo certifications
  • USB 2.0 support
  • IPMI 2.0
  • Secure Digital 2.0
  • TPM 1.2 and 2.0 support
  • IEEE (specific IEEE standards depending on the installed Ethernet adapter(s) card(s))
  • Advanced Encryption Standard (AES)
  • Triple Data Encryption Standard (3DES)
  • SNMP
  • SSL 2.0
  • DMTF Systems Management Architecture for Server Hardware Command Line Protocol (SMASH CLP)
  • Active Directory v1.0
  • PCIe 3.0
  • ASHRAE A3
Frames
The HPE Synergy 12000 board is the foundation for all Synergy products and supports:
  • Up to 12 half-height, 6 full-height, or 3 double-full-height compute modules (combination allowed)
  • Up to 5 half-height, double-width HPE Synergy D3940 Storage Modules (combined with compute modules in any allowed ratio)
  • Up to three (3) HPE Synergy 680 Gen9 Computing Modules
Graphics
Integrated matrox G200eh video controller
  • 1600x1200 (32bp)
  • 1920x1200 (16bp)
HPE iLO management in system management memory
  • 16 MB flash video memory
  • 256MB DDR 3 with ECC (112MB after ECC and video)
Form factor
The HPE Synergy 680 Gen9 is a full-height, double-width computing module that connects to the HPE Synergy 12000 frame
Security
  • Power-on password
  • admin password
  • Keyboard password (QuickLock)
  • HPE iLO management on system management chipset with:
    • SSL encryption
    • Secure shell version 2
    • AES and Triple Data Encryption Standard (3DES) in browser, CLP and XML scripting interface
    • AES and RC4 Video Encryption
  • Enable / disable external USB port
  • network server mode
  • Serial Interface Control
  • Trusted Platform Module (TPM) 1.2 and 2.0 Options
  • BEA
  • Intel AES-New Instructions (AES-NI)
Support for fiber channels
Up to four (4) optional Fiber Channel mezzanine HBAs are supported on the HPE Synergy 680 Gen9
compatible SAN
HPE Synergy 680 Gen9 Computing Modules are optimized for HPE MSA, EVA, 3PAR, XP and LeftHand

Software overview

Feature
Overview
Support for operating systems and virtualization software for computational modules
  • Microsoft Windows Server 2012 Datacenter and 2012 R2 Datacenter
  • Microsoft Windows Server 2012 Standard and 2012 R2 Standard
  • Microsoft Windows Server 2016 Standard Edition (includes Nano Server)
  • Microsoft Windows Server 2016 Datacenter Edition (includes Nano Server)
  • Microsoft Hyper-V 2016
  • Microsoft Hyper-V Server
  • Red Hat Enterprise Linux (RHEL)
  • SUSE Linux Enterprise Server (SLES)
  • VMware ESXi

Physical Specifications

Specification
Overview
Height (H x W x D) with frame
127 x 430,3 x 600 mm (5,06 x 16,94 x 23,62 in.)
Weight :
  • Maximum: 31,752 kg (69,85 lb)
  • Minimum: 27,15 kg (59,73 lb)
Power Specifications
For power specifications, including input requirements, BTU rating, and power supply output, see HPE Synergy Board TechSpecs.
HPE smart arrayP542D controller
storage interface
  • 12 Gb/s SAS (SCSI connected in series)
  • 6Gb/s SATA (serial advanced technology annex)
SAS Connectors
  • Two (2) external ports supporting SAS links x4 each and two (2) internal ports supporting SAS links x4 each
SAS speed
  • x16 12 Gb / s per physical link
PCIe link rate
  • PCIe 3.0 x8 links
Memory bus speed
  • DDR3-1866 MHz, 72-bit wide bus at 14,92 Gb/s (2GB cache module)
Supported logical commands
  • 64 logical drives
Max drives supported
  • Up to 256 units (up to 128 units per logical unit)
RAID support
  • RAID 6, 60 (advanced data protection)
  • RAID 5, 50 (distributed data protection)
  • RAID 1, 10 (drive mirroring)
  • RAID 1 ADM, 10 ADM (Advanced Data Mirroring)
  • RAID 0 (striping)
Upgradeable firmware
  • Flashable ROM with redundant firmware images
HPE smart arrayP240nr / 1GB controller
Disk drive interface
  • 12 Gb/s SAS (SCSI connected in series)
  • 6 Gb/s SATA (Serial ATA)
server interface
  • x8 5G PCIe 3.0 provides maximum bandwidth of 8GB/sec
cache memory
  • Write cache cache standard with 1GB flash support (FBWC)
Supported logical commands
  • 64 (with 1GB cache included)
Host memory address
  • 64-bit, with support for servers with memory space greater than 4 GB
RAID support
  • RAID 1 (mirroring), RAID 0 (striping), RAID 5, RAID 10
Other
  • Recovery ROM drive flash upgradeable firmware (with SAS drives)
HPE smart HBAH240nr smartHBA
Disk drive interface
  • 12 Gb/s SAS (SCSI connected in series)
  • 6 Gb/s SATA (Serial ATA)
computing module interface
  • x8 5G PCIe 3.0 provides maximum bandwidth of 8GB/sec
cache memory
  • No
Supported logical commands
  • 64
Host memory address
  • 64-bit, with support for compute modules with memory space greater than 4 GB
RAID support
  • RAID 1 (mirroring) and RAID 0 (striping), RAID 5, RAID 10
Other
  • Recovery ROM drive flash upgradeable firmware (with SAS drives)
HPE Synergy2820C 10Gbconvergednetwork Adapter
Model
  • 10Gb Double Door Mezzanine
network processor
  • QLogic 57840S with built-in MAC / PHY
Data transfer method
  • x8 PCI express 3.0
network transfer rate
  • Two ports, each at 20Gb/s full duplex; Aggregate full duplex theoretical bandwidth of 40 Gb / s
IEEE Compliance
  • 802.3, 802.3ab, 802.3u, 802.3x, 802.3ad, 802.3p, 802.1q, 802.3ae, 802.3ap
Standard Features
  • Offers flexibility to compose multiple network streams, including ethernet and FCoE oriSCSI on each connection
  • Full offload FCoE and iSCSI storage protocol processing hardware for converged Ethernet data and high-performance storage networks
  • Flex-10 technology allows you to adjust bandwidth for up to four partitioned NICs and FlexHBAs to optimize connectivity for different application needs. From 100 Mb / s to 10 Gb / s on up to four physical function NICs per port, in 100 Mb / s increments for NIC
HPESynergy 3820C10 / 20Gbconvergednetwork adapter
Model
  • 10/20 Gb Double Door Mezzanine
network processor
  • QLogic 57840S with built-in MAC / PHY
Data transfer method
  • x8 PCI express 3.0
network transfer rate
  • Two ports, each at 40 Gb/s full duplex; 80 Gb / s of aggregated full duplex theoretical bandwidth
IEEE Compliance
  • 802.3, 802.3ab, 802.3u, 802.3x, 802.3ad, 802.3p, 802.1q, 802.3ae, 802.3ap
Standard Features
  • Offers flexibility to compose multiple network streams, including ethernet and FCoE oriSCSI on each connection
  • Full offload FCoE and iSCSI storage protocol processing hardware for converged Ethernet data and high-performance storage networks
  • Flex-20 technology allows the user to adjust bandwidth for up to four partitioned FlexNICs and FlexHBAs to optimize connectivity for different application needs. From 100 Mb / s ​​20 Gb / s on up to four physical function NICs per port, in increments of 100 Mb / s for NIC. The combined bandwidth of NICs cannot exceed the port bandwidth, ie 20Gb

Environmental Specifications

Specification
Overview
Operating Temperature
10° to 35°C (50° to 95°F)
Out of operation temperature
-30° to 60°C (-22° to 140°F)
Extended operational support for environments
For approved hardware configurations, the supported system input range is extended to be: 5° to 10°C (41° to 50°F) and 35° to 40°C (95° to 104°F) at the sea ​​with an analtitude reduction of 1,0°C for every 175 m (1,8°F for every 574 ft) above 900 m (2953 ft) to a maximum of 3.050 m (10.000 ft).
Approved hardware configurations for this system are listed at the URL:
Operating relative humidity
8% a 90%
Non-operating relative humidity
5% a 95%
operational altitude
3050 m (10.000 ft)
Operation out of altitude
9144 m (30.000 ft)
acoustic noise
For acoustic noise specifications, see the HPE Synergy 12000TechSpecs chart located at:

 

Some segments of the economy that we help

Some segments of the economy that we help

 

Third party maintenance for HPE End-of-Life (EOL) and HPE End-of-Service-Life (EOSL)

A DC Parts made an analysis on more than 250 customer contracts that use storage, servers, networks and tapes and showed us that 40-60% of the equipment of these customers operate beyond the end dates of support.

There are simple options for you to reduce your expenses and feel more confident about your IT infrastructure. When you choose a custom solution to extend the life of your IT equipment, you can make big savings.

How can we help:

We offer our customers a unique assessment to help analyze their OEM support contracts and understand exactly which devices can be supported in the most affordable way, without compromising their performance.

HPE Blade Leases

A DC Parts provides HPE server rentals for a convenient and affordable solution to a range of data center issues such as seasonal spikes and data center relocation. We work to match the right approach with the right equipment to properly meet your customized need for HPE Storage and Blade leases. With a highly trained team of certified engineers ready to solve any problems, DC Parts is uniquely qualified to serve you. If you would like to speak with a representative about leasing HPE machines, please contact us.

HPE Blade Support

Support services DC Parts support HPE appliances. We work to match the right approach with the right equipment to meet your HPE equipment support needs. With a highly trained team of certified engineers ready to resolve any issues with HPE equipment, DC Parts is uniquely qualified to serve you. If you would like to speak with a representative about purchasing HPE Equipment Support, please contact us. THE DC Parts helps companies of all sizes better manage their IT data centers by providing third-party support services to leading equipment manufacturers, including: IBM, HPE, DELL EMC, NETAPP and much more. With support DC Parts, we manage all your hardware, between the manufacturers through a link. Support from DC Parts offers flexible service level agreements, certified engineering support teams and dedicated customer service representatives. Extend the life and value of your IT assets. contact support DC Parts immediately.

We customize maintenance contracts according to your specific needs, covering different brands and equipment throughout Brazil. Our services include parts exchanges, updates and software troubleshooting, providing complete support for your demands. To find out more visit – DC Parts serving more than 120 cities in Brazil

HPE - Hewlett Packard Enterprise

HPE ProLiant BLADE Servers

Let's talk?

We will contact you as soon as possible